The Refuse Store is 1.5m (5’) wide by 0.9m (3’) deep and is designed to fit a wheelie bin and three recycle boxes but this shed has been used for a myriad of other uses, it has an internal height of 1.56m (61”) at the front falling to 1.43m (56”) at the rear. There are a pair of 0.61m (24”) wide doors hung on black t-hinges in the centre of the low wall. A Brenton pad bolt also comes with each door. The Refuse store comes with two storage shelves to one side of the building and one open side, alternatively the shelves can be left out and the building can then take two full height wheelie bins.
The Refuse Store is constructed of (Ex 15mm) 12mm finished tongue & groove Scandinavian redwood shiplap fixed on 45mm x 45mm & 45mm x 22mm finished framework. The floor has (Ex 15mm) 12mm finished tongue & groove matching fixed to 47mm x47mm finished pressure treated floor bearers. The roof is an (Ex 15mm) 12mm finished tongue & groove matching fixed to 45mm x 45mm purlins which is covered with a Heavy Duty Polyester based roofing felt. All the wood used to make this shed is from sustainable sources.
Our buildings are treated both internally & externally with a preservative that helps to protect the timber. We do recommend that buildings are retreated within 3 months and then every year for continuous protection. The Garden Refuse store, as with all of our buildings can be completely customised, so if you need a different height, width, depth or door opening size please contact us with your specification for a quote.